How can I help you?
April
19
2023
Wednesday 9:00 am
-
April
22
2023
Saturday 5:00 pm

AERO Friedrichshafen

In-person
Exhibition
Friedrichshafen

econ as co-exhibitor with Altus Aero is attending AERO Friedrichshafen, the leading show for general aviation. Taking place in Friedrichshafen (Germany). With more than 600 exhibitors from 35 countries and 33,000 visitors from all over the world. The AERO Friedrichshafen is the international community’s annual meeting place.  

FIND US IN HALL B1 – STAND 305!

For scheduling a meeting, contact us at sales (at) econengineering.com!

About the Altus story

History

The story started in 2014 when it was decided together with Omikron Dokk Kft. to build a low wing fuselage, as there was no modern touring motorglider on the market with good visibility and the required interior space and design.

After the first aerodinamical calculations it became clear, that it is possible to make a low wing motorglider. Which is stable and has friendly flight and stall caracteristics. eCon Engineering Kft. helped us with aerodinamical simulations and structural calculations. With the control of the civil aviation agency we went thru all ground load tests successfully. Altus received the permit to fly in end of 2017.

The taxi tests begun, and we lifted up first time in may 2018. These were small jumps, but always a little bit bigger. Then we started the higher altitude flights for the stability tests. Altus was so easy to fly, and so forgiving, that it was hard to get one wing dropped. All tests run smooth, so we started the long distance flights. This is what makes the most fun with Altus.

Facts

The long wings are smoothing out the turbulences. We can fly long distances using only 5,5 liter petrol per 100 km. At one of the FAI world record we used only 43 liter for 1037 km with a maximum take off weight of 472 kg. Since the first flight Altus spent over 800 hours in the air and flown 5 FAI world records without a single problem, proving that our concept works.

We tested the aircraft with so much pilots and students as we can, to get the most complex picture as possible about the desired properties. Now we have built the wings for higher G load and speed, which Altus deserves, with a new generation airfoil, designed for 600 kg MTOW. Also the cabin size is slightly increased to meet the demand. The real story will just begin now…

Simulation starts with discovery

Accelerate & Automate your productivity

Whether it's model prep for simulation or introducing simulation in early-stage design. Discovery has everything you need for every engineering task.

Start your free trial today
Econ

Discovery